• Motor delivers 1,900 SPM for faster and smooth cutting
• Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
• Die holder rotates 360° to meet demands of cutting direction
• Convenient chip disposal is below cutting material to minimize damage to cutting surface
• Cutting radius: inner edge 45 mm (1-3/4″); outer 50 mm (2″)
• Battery capacity warning system turns light solid red and automatically stops motor to notify user that battery needs to be replaced
• Anti-restart protection minimizes motor start up when battery is inserted with switch locked on
• Rubberized soft grip for improved comfort
• Lock-on sliding switch for continuous operation
• Built-in thickness gauge
• Externally accessible carbon brushes for greater serviceability
• Battery protection circuit protects against overloading, over-discharging and over-heating
Buy From Retailer
| Carbon Brush | 430 | |
|---|---|---|
| Capacity | Steel up to 400 N/mm²: 1.6 mm Aluminum up to 200 N/mm²: 2.5 mm |
Steel up to 600 N/mm²: 1.2 mm |
| Min. cutting radius | Inside edge: 45 mm (1-3/4″) | Outside edge: 50 mm (2″) |
| Strokes per minute | 1,900 minˉ¹ | |
| Dimensions (L × W × H) | 313 x 78 x 189 mm (12-3/8 x 3-1/16 x 7-7/16″) | |
| Net weight | 1.9 – 2.3 kg (4.3 – 5 lbs.) | Battery dependent |
26mm Stroke Jig Saw | 0 – 3,500 strokes/min | BL | 18V Li-Ion | Barrel Handle | Tool only
Demolition Hammer | SDS Max | 7.6 Joule | 5.1kg – for light chipping | 1,100 – 2,650 blows/min | 1,100W
Breaker | 28.6mm Hex shank | 72.8 Joule | 31.3kg | 870 blows/min | 2,000W | AVT
